MV Epoxy Primer
What is MV Epoxy Primer?
MV Epoxy Primer is a two-part, 100% solids epoxy moisture mitigation system. This moisture-tolerant and VOC Complaint product limit the transmission of moisture, odor, and other elements through concrete slabs.
Why Choose MV Epoxy Primer?
MV Epoxy Primer should be used when moisture vapor emission rates are high (up to 23 pounds / 1000 ft2 / 24 hours when measured by the calcium chloride tests or up to 99% relative humidity when measured by humidity probe testing).
MV Epoxy Primer meets the requirements of ASTM F3010 standard practice of two-component, resin-based, membrane-forming moisture mitigation systems under resilient floor coverings.
MV Epoxy Primer may be applied to fresh or green concrete that has been poured and in place for 15 days (vs. 30 days).
MV Epoxy Primer is compatible with subsequent coats of MC Epoxy, UltraSpartic, or topcoats.
- Fast cure / same day topcoat
- Excellent bond to dry or damp surfaces
- Easy to apply
- Single coat application
- Quick dry time
- Extremely smooth finish
10-gallon Kit: 5-gallon Part A + 5-gallon Part B (mix 1:1 ratio by volume)
MV Epoxy Primer Coverage Rate
Required coverage rate: 70-80 SF / gallon (20-23 mils) Texture, absorption of surface, and application processes will determine final coverage rates. Rough or porous concrete may require additional material.
24 months unopened when stored at room temperature (59-77°F, 15-25°C)
Ultra HTS Data Sheets
Access all Ultra HTS Data Sheets (SDS, TDS, & PDS).