EPIC Instructional Video: Mixing EPIC This video details all the steps of mixing EPIC High-Performance Floor Finish. Please follow the instructions carefully for the best results. go back to videos FULL VIDEO TRANSCRIPT: This video will cover the steps to properly mix EPIC. Ensure use-by date on part A is current, not expired. Ensure all components are between 59 and 77° F. Put on rubber gloves and safety glasses prior to mixing EPIC. Open part A and stir thoroughly with a stir stick. Shake part A1 vigorously for 15 seconds. Pour part A1 into part A bucket and mix thoroughly by hand with a stir stick for 15 seconds. For standard kits, measure 16 to 18 ounces of water. For contractor kits, measure 32 to 36 ounces of water. Set the timer for 2 minutes. Open part B and pour part B into part A while stirring for 2 minutes and scraping the sides and the bottom. After the 2 minutes, immediately add half of the water and stir for 15 seconds. Then add the remaining half of the water and stir vigorously for 2 minutes, scraping the sides and the bottom. If coating ceramic or stone, add bond promoter and mix for 30 seconds. For added traction, add one scoop of aggregate or one bag of Ultragrip and mix for 15 seconds. Stir before every pour. EPIC is now ready to use.