CONCRETE PRODUCTS

UltraSpartics

85-EXT LO, 85-FAST LO & 100

IMG_7019_2
UltraSpartic Group

Ultra Durable Polyaspartic Floor Coatings

UDT's complete line of UltraSpartic (polyaspartic) floor coatings has been exclusively formulated and improved by UDT.

US85-EXT LO, US85-FAST LO & US 100 are excellent topcoats for abusive environments like garages, warehouses, production areas, and restrooms.

In addition to high-performing topcoats, UDT's UltraSpartic coatings are used as clear primers for Ultra Grind, Prime & Seal Systems, and pigmented with UltraColor Pigment Packs to achieve solid-colored primers, body coats, and topcoats.

UDT has dramatically improved UltraSpartic 85-EXT LO and UltraSpartic 85-FAST LO to exceed contractors' requests.

UltraSpartic 85-EXT LO

  • LO = low odor: Eliminate complaints and provide access to odor-sensitive areas
  • Optimal Viscosity: Great leveling with the right amount of "body" to apply comfortably
  • Extended Working Time: 25+ minutes of working time in warm conditions
  • Resistance to Outgassing: No bubbles from "over-working" in hot/humid conditions
  • Convenient mixing ratio of 1:1
  • 3rd Party Verified testing Data:
    • Taber Abrasion of "12" equates to minimal degradation and extreme gloss retention
    • König hardness of "180," which means an even more durable surface
    • Mandrel Bend 1/8" "Pass" exhibits retained flexibility required for hard coatings

UltraSpartic 85-FAST LO

  • Fast re-coating and return-to-service times
  • Thin-film primers for clear and pigmented systems
  • Cold temperatures and extremely dry climates
  • Dry time of 1-2 hours
  • Convenient mixing ratio of 1:1
  • 3rd party verified testing for the Technical Data Sheet (TDS) including:
    • Taber Abrasion of “9” equates to minimal degradation and extreme gloss retention  
    • König hardness of “170” which means an even more durable surface  
    • Mandrel Bend 1/8” “Pass” exhibits retained flexibility required for hard coatings 

UltraSpartic 100

  • 99% solids by weight
  • Extremely low VOC (20 g/l)
  • Nearly no odor
  • Thick viscosity for vertical surfaces
  • Solvent-reducible for a variety of uses

Contractors and building owners continue to choose UDT's UltraSpartic coatings because of their very-low odor, user friendliness, excellent hardness, bond strength, UV resistance, tire/chemical stain resistance, and gloss retention!

CONTACT US or complete the form below
to find out about our UltraSpartic promotional pricing!

UltraSpartic Promotion
First
Last
garage 1

A case study featuring beautiful, long-lasting results achieved with UltraSpartic 100 at the University of Minnesota's Freeman Aquatic Center was published by one of our midwest contractors, SwedeBro. Check it out HERE.

UofM Freeman Aquatic Center - Photo Courtesy of SwedeBro

Case Study

Ultra Full Flake
University of Tennessee Aquatic Center
Installed by Titan Exterior Services
Distributed by SCI

UltraSpartic-photo