CSP Sealer

WOULDN’T IT BE NICE IF YOU COULD APPLY AN EXTERIOR SEALER THAT LASTS FOR MORE THAN A COUPLE OF MONTHS?

After all the work you put into cleaning and sealing your concrete, stone or pavers, apply one thin coat of CSP Sealer to protect it and keep it looking good for years!

CSP Sealer is formulated to save you time and money by protecting and beautifying concrete pavers, sidewalks, and patios. With amazingly super-wetting and enhancing characteristics, CSP Sealer has extreme durability and UV-resistance that allows you to enjoy the benefits for years instead of weeks!

One thin-coat of CSP Sealer will brighten and enhance your patios and sidewalks more than any other traditional acrylic floor sealer.

With almost no odor, CSP Sealer may be applied directly to concrete, stone and pavers and even over UDT Concrete Dye. Mix according to directions and pour contents into a garden-variety pump sprayer. Spray it on the floor and work it in (back-roll) with a UDT supplied 3/8” woven roller.

What you see is what you get. Most paver sealers start to lighten and whiten as they dry. CSP Sealer keeps that wet look even after it has completely dried!

Consult with Ultra Durable Technologies for honest, reliable recommendations of concrete, stone and paver floor maintenance.

UNIQUE ADVANTAGES
  • Simple, ultra-clear, thin-coat application
  • Designed for indoor and outdoor use
  • High-gloss version with super-wetting that enhances and brightens colors or,
  • Non-yellowing and UV stable
  • Extreme chemical and abrasion resistance (even to salts and acids)
  • Increased slip-resistance available for smooth and commonly wet areas
  • Water-based crosslinking technology

CSP COVERAGE RATES

Standard Kit (approximate):
200-375 Sq. Ft.= CSP using the Pump spray/Back-Roll Method
150-250 Sq. Ft.= CSP using the Rolling Method

Bulk 4-Gallon Kit (approximate):
1,600-3,000 Sq. Ft.= CSP using the Pump spray/Back-Roll Method
1,200-2,000 Sq. Ft.= CSP using the Rolling Method